Changes in arsenic fractionation, bioaccessibility and speciation in organo-arsenical pesticide amended soils as a function of soil aging

Although organoarsenical pesticides are being phased out, sites with high concentrations of organic arsenical residues still exist due to the long-term application of these pesticides. The biotic and abiotic speciation of dimethylarsinic acid (DMA) can result in the formation of inorganic arsenic (As) species. Oxidation state, retention, and thereby persistence, varies according to temporal changes, influencing the availability and toxicity of contaminants. The current greenhouse study aimed at evaluating temporal changes in the oxidation state of As, geochemical partitioning, and bioaccessibility. Four soils with varying physiochemical properties were contaminated with DMA at two concentrations (675 and 1500 mg kg⁻¹ of As). Rice plants were grown for a 6 months period, following which, the soils were allowed to age. The operationally defined forms of As and its bioaccessibility was analyzed at 0, 6 months, 1 year, and 3 years. Changes in oxidation state of As were evaluated immediately after spiking and after 3 years of soil-pesticide equilibration. Results show that geochemical partitioning of As was affected significantly (P < 0.05) by soil type, loading rates, and equilibration time. Arsenic was bound mainly to the poorly-crystalline Fe/Al-oxyhydroxides in the soil. However, these interactions did not affect As bioaccessibility, presumably due to the dissolution of the bound fractions of As in the acidic stomach. While 74-94% of the total bioaccessible As was transformed to As(V), 4-19% was transformed to the more toxic As(III). This study indicates that although aging affected the geochemical partitioning of As in the soil, bioaccesibility was controlled by the gastric pH.     

Impact of long-term wastewater application on microbiological properties of vadose zone

Impact of wastewater irrigation on some biological properties was studied in an area where treated sewage water is being supplied to the farmers since 1979 in the western part of National Capital Territory of New Delhi under Keshopur Effluent Irrigation Scheme. Three fields were selected which had been receiving irrigation through wastewater for last 20, 10 and 5 years. Two additional fields were selected in which the source of irrigation water was tubewell. The soil bacterial and fungal population density was studied in soil layers of 0?C15, 15?C30, 30?C60 and 60?C120 cm depths. Groundwater samples were collected from the piezometers installed in the field irrigated with sewage water for last 20, 10 and 5 years. Results indicate that there was significant increase in bacterial and fungal count in sewage-irrigated soils as compared to their respective control. The population density of bacteria and fungi in waste water-irrigated soils increased with the duration of sewage water application and decreased with increasing depth. The bacterial and fungal count was also directly proportional to organic carbon, sand and silt content and negatively correlated to the clay content, electrical conductivity, pH and bulk density of the soil. Groundwater under sewage-irrigated fields had higher values of most probable number (MPN) index as compared to that of tubewell water-irrigated fields. All the shallow and deep groundwaters were found to be contaminated with faecal coliforms. The vadose zone had filtered the faecal coliform to the tune of 98?C99%, as the MPN index was reduced from ??18,000 per 100 ml of applied waste water to 310 per 100 ml of groundwater under 20 years sewage-irrigated field. The corresponding values of MPN were 250 and 130 per 100 ml of shallow groundwater under 10 and 05 years sewage-irrigated fields, respectively. Rapid detection of faecal contamination suggested that the Citrobacter freundii and Salmonella were dominant in shallow groundwater, while Escherichia coli was dominant in deep groundwater collected from sewage-irrigated field.     

A new system for groundwater contamination hazard rating of landfills

In developing countries, several unregulated landfills exist adjacent to large cities, releasing harmful contaminants to the underlying aquifer. Normally, landfills are constructed to hold three types of waste, namely hazardous waste, municipal solid waste, and construction and demolition waste. Hazardous waste and municipal solid waste landfills are of greater importance as these pose greater hazard to groundwater, in comparison with landfills holding waste from construction and demolition. The polluting landfills need to be prioritized to undertake necessary control and remedial measures. This paper assesses existing site hazard rating systems and presents a new groundwater contamination hazard rating system for landfills, which can be used for site prioritization. The proposed system is based on source-pathway-receptor relationships and evaluates different sites relative to one another. The system parameters have been selected based on literature. The Delphi technique is used to derive the relative importance weights of the system parameters. The proposed system is compared with nine existing systems. The comparison shows that the site hazard scores produced by the existing systems for hazardous waste, municipal solid waste, and construction and demolition waste landfills are of the same order of magnitude and tend to overlap each other but the scores produced by the proposed system for the three types of landfills vary almost by an order of magnitude, which shows that the proposed system is more sensitive to the type of waste. The comparison further shows that the proposed system exhibits greater sensitivity also to varied site conditions. The application of different systems to six old municipal solid waste landfills shows that whereas the existing systems produce clustered scores, the proposed system produces significantly differing scores for all the six landfills, which improves decision making in site ranking. This demonstrates that the proposed system makes a better tool for prioritization of landfills for adopting control measures and remediation.     

Toxicity,degradation and analysis of the herbicide atrazine

Excessive use of pesticides and herbicides is a major environmental and health concern worldwide. Atrazine, a synthetic triazine herbicide commonly used to control grassy and broadleaf weeds in crops, is a major pollutant of soil and water ecosystems. Atrazine modifies the growth, enzymatic processes and photosynthesis in plants. Atrazine exerts mutagenicity, genotoxicity, defective cell division, erroneous lipid synthesis and hormonal imbalance in aquatic fauna and nontarget animals. It has threatened the sustainability of agricultural soils due to detrimental effects on resident soil microbial communities. The detection of atrazine in soil and reservoir sites is usually made by IR spectroscopy, ELISA, HPLC, UPLC, LC–MS and GC–MS techniques. HPLC/LC–MS and GC–MS techniques are considered the most effective tools, having detection limits up to ppb levels in different matrices. Biodegradation of atrazine by microbial species is increasingly being recognized as an eco-friendly, economically feasible and sustainable bioremediation strategy. This review presents the toxicity, analytical techniques, abiotic degradation and microbial metabolism of atrazine.     

Effect of depth of landfill on the characteristics of soil-like material of aged waste: a case study of Bhalswa dumpsite,India

Journal of Material Cycles and Waste Management - This study characterizes the municipal solid waste (MSW) accumulated for more than 25&nbsp;years at Bhalswa dumpsite, Delhi, India. 50...     

Visible light driven instantaneous photocatalytic degradation of aniline blue (AB) and methyl violet (MV) by strontium ferrite nanoparticles

Toxic organic dyes released into aquatic sources as a result of industrial activities pose a significant threat to the environment. The removal of such dyes from water sources is a challenging task in the context of environmental emergencies. In this present effort, the strontium ferrite nanoparticles were synthesized by coprecipitation followed by a calcination method and is applied for photocatalytic degradation of such organic dyes. The ferrite nanoparticles were characterized by FTIR, XRD, VSM, SEM-EDX, TEM, and HR-TEM studies. In the existence of H₂O₂ under visible light, the catalyst performs efficient degradation of aniline blue (AB) and methyl violet (MV) dyes in a remarkably short interval of time. The superparamagnetic performance of the catalyst was confirmed by VSM, and thus it can be easily recovered from the degraded dye by applying an external magnet. The Fenton mechanism justifies the elevated rate of photo degradation, which generates hydroxyl and perhydroxyl radicals in the progress of the reaction.     

Comprehensive investigation of various re-refining technologies of used lubricating oil: a review

Journal of Material Cycles and Waste Management - Waste lubricating oil is considered to be a hazardous waste and has tremendous impact on human health and environment. The present review...     

Efficient photocatalytic degradation of aniline blue under solar irradiation by ternary cobalt ferrite/graphitic carbon nitride/bentonite nanocomposite

Environmental Science and Pollution Research - The current research describes the synthesis, characterization and application of CoFe2O4/g-C3N4/bentonite as a novel nanocomposite for the efficient...